FiReP® HIPREX®/FRP INJECTION BOLTS

HIGH PRESSURE ROCKMASS INJECTION.

FiReP® HIPREX® is a FRP tube with integrated packer function for high pressure injection of weathered rock mass.

The high torque hollow bar is fitted with an expansion packer and integrated non return valve. Two additional valves are fitted to both ends of the tube, the top valve to open when the packer is inflated, the bottom valve to prevent backflow after injection. 

 The FRP system allows cutting during heading or mining of ore. Rapid heading will not be delayed. Light weight makes handling easy, even in confined underground conditions.

 

Product Image
Product Image
Advantages
  • ALL THREAD REBAR
  • HIGH END LOADING
  • PERMANENT APPLICATION
Features
  • High flexibility suited for applications without couplings in confined locations.
  • Low density reaching just 30% of the density of steel
  • The special FiReP® thread profile and an optimized matching between bolt thread and nut thread ensure high end loads that can almost reach the level of steel anchor systems
  • Low weight facilitates handling, minimizes the transportation weight
  • Super high hydraulic pressure resistance

Configurations

PROPERTIES NOMINAL VALUE
Outer Diameter (mm) 25
Inner Diameter (mm) 8
Cross Sectional Area (mm²) 350
Breaking Thread Load- Steel Nut 180
Beaking Thread Load- FRP Nut 70
Bending E-Modulus (Gpa) 40
Antistatic( Ø) 10E8
Inner Pressure (MPa) 240
Strain At Failure (%) 2.1
Weight (kg/m) 0.78
Product Options
  • BOLT GRP INJ 2M J64-22/8 NT0000140
  • BOLT GRP INJ 3M 9.5MM J64-22/8 NT0000142
  • INJ GRP INJECTION BOLTS 2M 25/8MM NT0000133
  • INJ GRP INJECTION COUPLERS NT0000131
Packaging
  • Usually packed 150 bolts per pallet