Construction

Construction

The versatility of our portfolio, which has been successfully applied for decades in the mining industry, means our products are equally suitable for applications in the construction sector such as ground and water control.

Structural Repair

The maintenance of structures is critical for ongoing safety and performance.

Structural Repair applications
arrow arrow

Structural Repair

The maintenance of structures is critical for ongoing safety and performance.

Structural Repair applications
arrow arrow

Structural Repair

The maintenance of structures is critical for ongoing safety and performance.

Structural Repair applications
arrow arrow

Sewer Repair

Maintaining critical assets with repair and rehabilitation solutions.

Sewer Repair applications
arrow arrow

Ground control

The stability and integrity of construction assets is crucial to keep structures and people safe.

Ground control applications
arrow arrow

Ground control

The stability and integrity of construction assets is crucial to keep structures and people safe.

Ground control applications
arrow arrow

Ground control

The stability and integrity of construction assets is crucial to keep structures and people safe.

Ground control applications
arrow arrow

Ground control

The stability and integrity of construction assets is crucial to keep structures and people safe.

Ground control applications
arrow arrow

Ground control

The stability and integrity of construction assets is crucial to keep structures and people safe.

Ground control applications
arrow arrow

Ground control

The stability and integrity of construction assets is crucial to keep structures and people safe.

Ground control applications
arrow arrow

Water control

Water ingress into or out of new and existing assets can represent a major risk if not recognised and rectified.

Water control applications
arrow arrow

Cavity & Backfilling

Increased stresses and variable geological and weather conditions can lead to fractured and voided ground, which if not supported, can lead to incidents of rock fall or roof collapse.

Cavity & Backfilling applications
arrow arrow

Cavity & Backfilling

Increased stresses and variable geological and weather conditions can lead to fractured and voided ground, which if not supported, can lead to incidents of rock fall or roof collapse.

Cavity & Backfilling applications
arrow arrow

Cavity & Backfilling

Increased stresses and variable geological and weather conditions can lead to fractured and voided ground, which if not supported, can lead to incidents of rock fall or roof collapse.

Cavity & Backfilling applications
arrow arrow

Cavity & Backfilling

Increased stresses and variable geological and weather conditions can lead to fractured and voided ground, which if not supported, can lead to incidents of rock fall or roof collapse.

Cavity & Backfilling applications
arrow arrow

Chemical injection

Our extensive range of injectable products and systems are used for crack repair and water control.

Product title
CarboCrackSeal H Plus

CarboCrackSeal H Plus serves for grouting, sealing and elastic connection of fissures and cavities in for concrete, brickwork or natural stone buildings and other civil engineering structures.

This slow reacting, highly flexible two-component polyurethane resin has wide use in the construction industry.

CarboCrackSeal H Plus, Comp. A comprises of polyetherester polyols and additives, while CarboCrackSeal H Plus, Comp. B is a modified isocyanate.

The resin is applied through injection hoses embedded in concrete structures ensuring proper resin distribution. This product is widely used for structural repair and water stoppage.

Explore Product
arrow arrow
Product title
CarboPur WF

CarboPur WF, Component A is a mixture of various polyols and additives and component B is a polyisocyanate.
When the mixed resin penetrates the structure to be sealed, the water in the cracks and joints is displaced due to the hydrophoby and the viscosity of the resin. Traces of water make the resin foam.

Explore Product
arrow arrow
Product title
CarboPur WX

CarboPur WX, Component A is a mixture of various polyols and additives which reacts with the B-component to form a tough/hard polyurethane resin. CarboPur, Component B is a polyisocyanate on the basis of 4,4'-diphenylmethane diisocyanate (MDI).

The accelerator CarboAdd WX can be used to promote the gelling reaction.

Explore Product
arrow arrow

Joints repairing

Our resins and grouts repair various joints, increasing the lifespan of your structures.

Product title
CarboCryl

CarboCryl products have a watery consistency and is injected into structures. They sets as a gel in any pores and fissures. The treated area then has the strength and waterproofing characteristics required. CarboCryl products are also solvent-free, making it an environmentally friendly solution for these types of repair projects.

CarboCryl are well suited for use in the following applications:

  • Injection barrier for sealing basements against water seepage and ingress
  • Horizontal barrier against rising humidity in brick work
  • Injection of fissures against oppressive or non-oppressive water
  • Pressure sealing of injection hoses
  • Repair of defective tunnel sealing membranes
Explore Product
arrow arrow
Product title
CarboStop

Special types with closed-cell resin structure were developed to increase ground impermeability or seal joints in civil structures.

These products are used for:

Grouting of fine to very fine hair line cracks and water-carrying sands or porous materials. Used for deep injecting, fixing of anchors, stabilisation and sealing of loose rock, stoppage of water inflow (also salt water), injecting of man-accessible sewer lines and tubes.

Stopping water inflow (also salt water), stabilisation and water sealing of loose rock, grouting of fine to medium-fine grained sands and gravel, fixing of anchors, injection of cracks, honeycombs, injections of man-accessible sewer lines and tubes

Stopping of water inflow (also salt water), sealing of loose rock, sealing of cracks and expansion joints in bridges and concrete structures. For use in deep injection, grouting of medium-fine to larger cracks, fissures, honeycombs, injections of man-accessible sewer lines and tubes where high elasticity and flexibility is required.

Stopping of flowing water, restoration of concrete structures according to German ZTV-ING.

 

Explore Product
arrow arrow
Product title
CarboCrackSeal H Plus

CarboCrackSeal H Plus serves for grouting, sealing and elastic connection of fissures and cavities in for concrete, brickwork or natural stone buildings and other civil engineering structures.

This slow reacting, highly flexible two-component polyurethane resin has wide use in the construction industry.

CarboCrackSeal H Plus, Comp. A comprises of polyetherester polyols and additives, while CarboCrackSeal H Plus, Comp. B is a modified isocyanate.

The resin is applied through injection hoses embedded in concrete structures ensuring proper resin distribution. This product is widely used for structural repair and water stoppage.

Explore Product
arrow arrow

Sprayed coatings & membranes

Minova products are used for the structural reinforcement of concrete.

Product title
Tekcrete™ Fast M

Fibre reinforced, this product offers strengths over 55 MPa and can be used in conventional, dry-process shotcrete equipment. It is ideal where immediate structural strength is required.

Tekcrete™ Fast M was developed in response to customer demand for a shotcrete with effectively immediate strength on application. The product can be used with or without steel or polymer mesh, although the mesh will provide additional tensile and flexural strength. Binding broken strata together for better structural integrity, Tekcrete™ Fast M can be used anywhere in a mine where conventional shotcrete is used and as with any coating or sealant.

 

Explore Product
arrow arrow
Product title
CT Concrete Repair Systems

CT-2

CT-2 is a mortar used for repair and reconstruction of concrete and reinforced concrete. CT- 2 can be applied either manually with use of the bonding grout CT-S or CTA/ S, or by a wet-spray process for large area repairs.


CT-A/S

CT-A/S is a PCC/SPCC fine anti-corrosion and bonding mortar used for the repair and reconstruction of concrete structures. CT-A/S is also used as reinforcing steel anti-corrosion mortar and as bonding mortar between concrete and construction repair mortars.


CT-6

Repair Mortar CT-6 is a one-component material, ready-to- use after mixing with batched water. CT-6 is a cement-based mortar with high quality aggregate up to 8 mm and modified with additives and polymers (PCC / SPCC). The material is dedicated for wet-process spraying as well as for manual repairs of concrete. CT-6 is a part of CT-95 Concrete Repair System.


CT-D

CT-D is a one-component material, ready-to- use after mixing with batched water. CT-D is a cement-based mortar with high quality aggregate up to 4 mm and modified with additives and polymers (PCC). CT-D is a part of CT-95 Concrete Repair System.


CT-K

CT-K is a one-component material, ready-to- use after mixing with batched water. CT-K is a cement-based mortar with high quality aggregate up to 4 mm and modified with additives and polymers (PCC). CT-K is a part of CT-95 Concrete Repair System.


CT-W

CT-W is a one-component material, ready-to- use after mixing with batched water. CT-W is a cement-based mortar with high quality aggregate up to 2 mm and modified with additives and polymers (PCC / SPCC). CT-W is a part of CT-95 Concrete Repair System.

 

Explore Product
arrow arrow
Product title
Tekflex

The high-strength Tekflex membrane was originally developed according to the TSL (Thin-Sprayed-Liner) technology to serve as an alternative to steel mesh and shotcrete for mining projects. Today, the Tekflex family has expanded and covers many more applications in the civil and tunnelling sectors.

Tekflex products are based on mineral materials with special additives or polymers to achieve sufficient rigidity or required flexibility depending on the type of the application. With just a few mm of thickness, the Tekflex membranes represent an effective, low-cost solution for changing the mechanical parameters of the lining or increasing impermeability. 

 

Explore Product
arrow arrow

Special

Specialist products aimed at enhancing structual repairs within the construction industry.

Product title
CarboSolv U

It is a solvent designed for cleaning implements and especially pumps after use of polyurethane/silicate resins.

Explore Product
arrow arrow
Product title
CarboSolv D

It is a solvent blend based on dicarbonic acid esters. It has got a high polarity and is environmentally friendly.

Explore Product
arrow arrow
Product title
CarboSolv S

It is a lubricant based on synthetic esters, that is readily biodegradable and is compatible with standard sealing materials such as Viton, FPM, HBNR, AU, NBR.

Explore Product
arrow arrow

Chemical injection

Maintaining critical assets with repair and rehabilitation solutions.

Product title
CarboLith

CarboLith products are used for ground stabilisation and filling of smaller cavities in the construction industry.

The products help in various renovation and construction of concrete, roads and infrastructure assets.

Explore Product
arrow arrow
Product title
CFT Harz

CFT Harz, component A is a mixture of various polyols and additives. CFT Harz, component B is a polyisocyanate. CFT Harz, component C is an accelerator.

The mixed resin penetrates the structure which has to be sealed. The majority of any water in there is displaced due to the hydrophobic nature and the viscosity of the resin. Traces of water make the resin foam.

This resin is designed for sealing, stabilisation and consolidation in water-bearing strata and repair of old sewers, shafts, and tunnels.

Explore Product
arrow arrow
Product title
CarboPur WT

CarboPur WT, component A is a mixture of various polyols and additives, and CarboPur, component B is a polyisocyanate.

After mixing, the resin thickens immediately to a paste-like consistency. The mixed resin penetrates the structure to be sealed. The major part of water in there is displaced due to the hydrophoby and the viscosity of the resin. Traces of water make the resin foam.

Explore Product
arrow arrow
Product title
CarboPur WFA

This resin is designed for sealing and consolidation in water-bearing strata.

CarboPur WFA, Component A is a mixture of various polyols and additives which reacts with the B-component to form a tough/hard polyurethane resin. CarboPur, Component B is a polyisocyanate.

The two components are pumped by a dual component pump at the volumetric ratio of 1 : 1, they are mixed thoroughly in a static mixer unit prior to injection into the strata via a packer installed in a previously drilled borehole.

Explore Product
arrow arrow

Manholes repairing

Our products help restore manholes and sewer entrances.

Product title
CT Concrete Repair Systems

CT-2

CT-2 is a mortar used for repair and reconstruction of concrete and reinforced concrete. CT- 2 can be applied either manually with use of the bonding grout CT-S or CTA/ S, or by a wet-spray process for large area repairs.


CT-A/S

CT-A/S is a PCC/SPCC fine anti-corrosion and bonding mortar used for the repair and reconstruction of concrete structures. CT-A/S is also used as reinforcing steel anti-corrosion mortar and as bonding mortar between concrete and construction repair mortars.


CT-6

Repair Mortar CT-6 is a one-component material, ready-to- use after mixing with batched water. CT-6 is a cement-based mortar with high quality aggregate up to 8 mm and modified with additives and polymers (PCC / SPCC). The material is dedicated for wet-process spraying as well as for manual repairs of concrete. CT-6 is a part of CT-95 Concrete Repair System.


CT-D

CT-D is a one-component material, ready-to- use after mixing with batched water. CT-D is a cement-based mortar with high quality aggregate up to 4 mm and modified with additives and polymers (PCC). CT-D is a part of CT-95 Concrete Repair System.


CT-K

CT-K is a one-component material, ready-to- use after mixing with batched water. CT-K is a cement-based mortar with high quality aggregate up to 4 mm and modified with additives and polymers (PCC). CT-K is a part of CT-95 Concrete Repair System.


CT-W

CT-W is a one-component material, ready-to- use after mixing with batched water. CT-W is a cement-based mortar with high quality aggregate up to 2 mm and modified with additives and polymers (PCC / SPCC). CT-W is a part of CT-95 Concrete Repair System.

 

Explore Product
arrow arrow
Product title
Minobond Pumpable Grouts

We offer two different products within this category, that vary in setting speeds and application area.

Minobond AM is an anchoring mortar used for the grouting of steel parts in horizontal and vertical concrete surfaces and the filling of scratches, cracks, joints and deficiencies of concrete.

Minobond APS is a single component highly fluid rapid setting grout, designed especially for APS sewer manhole repair, whilst it is also used for filling backfill voids.

 

 

Explore Product
arrow arrow
Product title
Minostop

It is supplied as a ready to use blend of dry powders which requires only the addition of clean water to produce a highly compacted, rapid setting mortar which is easy to apply.

The material is based on a blend of cements, graded aggregates, special fillers and chemical additives which control the rate of set and minimise the risk of shrinkage cracking.

Explore Product
arrow arrow

Sprayed coatings & membranes

Our sprayed coatings and membranes are used to protect and create water barriers protecting sewers.

Product title
CT Concrete Repair Systems

CT-2

CT-2 is a mortar used for repair and reconstruction of concrete and reinforced concrete. CT- 2 can be applied either manually with use of the bonding grout CT-S or CTA/ S, or by a wet-spray process for large area repairs.


CT-A/S

CT-A/S is a PCC/SPCC fine anti-corrosion and bonding mortar used for the repair and reconstruction of concrete structures. CT-A/S is also used as reinforcing steel anti-corrosion mortar and as bonding mortar between concrete and construction repair mortars.


CT-6

Repair Mortar CT-6 is a one-component material, ready-to- use after mixing with batched water. CT-6 is a cement-based mortar with high quality aggregate up to 8 mm and modified with additives and polymers (PCC / SPCC). The material is dedicated for wet-process spraying as well as for manual repairs of concrete. CT-6 is a part of CT-95 Concrete Repair System.


CT-D

CT-D is a one-component material, ready-to- use after mixing with batched water. CT-D is a cement-based mortar with high quality aggregate up to 4 mm and modified with additives and polymers (PCC). CT-D is a part of CT-95 Concrete Repair System.


CT-K

CT-K is a one-component material, ready-to- use after mixing with batched water. CT-K is a cement-based mortar with high quality aggregate up to 4 mm and modified with additives and polymers (PCC). CT-K is a part of CT-95 Concrete Repair System.


CT-W

CT-W is a one-component material, ready-to- use after mixing with batched water. CT-W is a cement-based mortar with high quality aggregate up to 2 mm and modified with additives and polymers (PCC / SPCC). CT-W is a part of CT-95 Concrete Repair System.

 

Explore Product
arrow arrow
Product title
FT-30

When mixed with water, the material sets within minutes. It creates a coating with instant resistance to pulling off and delamination caused by active leaks of water. It is particularly recommended for areas with high moisture content or highly watered.

Explore Product
arrow arrow
Product title
Tekflex DS-W

The powder is mixed with water at the special nozzle and creates a suspension, which gels within seconds, creating a continuous membrane on the applied surface.

After several minutes, it becomes tack free and then rapidly increases in strength over next days.

As a result, a strong and elastic sealing membrane is formed.

The membrane bonds very well to surfaces such as rock, coal and concrete.

Explore Product
arrow arrow

Special

Specialist products providing optimum sewer repair within the construction industry.

Product title
CarboSolv U

It is a solvent designed for cleaning implements and especially pumps after use of polyurethane/silicate resins.

Explore Product
arrow arrow
Product title
CarboSolv D

It is a solvent blend based on dicarbonic acid esters. It has got a high polarity and is environmentally friendly.

Explore Product
arrow arrow
Product title
CarboSolv S

It is a lubricant based on synthetic esters, that is readily biodegradable and is compatible with standard sealing materials such as Viton, FPM, HBNR, AU, NBR.

Explore Product
arrow arrow

Anchoring

We offer both steel and glass fibre reinforced polymer bolting products and accessories to stabilise the ground.

Product title
Self Drilling Soil and Rock Nails

SRNs are typically grouted along their entire length. In geotechnical engineering, they are used to stabilise natural or artificial slopes or to support structures e.g. retaining walls. To further stabilise the surface of the slope or rock, various support systems e.g. flexible reinforcing meshes or geotextiles may be installed that are held in place by the head plates of the nails.

Explore Product
arrow arrow
Product title
Rock Bolts

We provide you with solutions for both active and passive methods of rock support wherever you are.

Our products range from various steel and Glass Fibre Reinforced Polymer (GFRP) bolts to steel arches, meshes and shotcretes.

Our offering can help you with:

  • Roof and ground control
  • Slope stabilisation
  • Rock fall
  • Permanent and temporary rock bolting
  • Spiling
  • Converging/yielding areas

Bolts alone may not be enough.

Many applications require additional components to ensure the desired results.

We provide steel and GFRP accessories that work in combination with our products for you to achieve the best outcomes. From drill bits, couplings, meshes to plates and nuts and trusses. Our portfolio works to provide you with the right solutions wherever you are.

Explore Product
arrow arrow
Product title
Glass Fibre Resin Polymer Products

GFRP products are suitable for temporary and permanent solutions and with their low-weight, their are ideal for decreasing risks associated with manual handling.

Our partnership with FiReP® allows us to provide you with the flexibility that you need, wherever you are.

FiReP® Group is one of the world’s largest producer of Fibre Reinforced Polymer (FRP) pultruded bars with unique profiles and thread functions for application in the mining, construction and energy sectors.

The Group has two plants in Shanghai (China) and Velenje (Slovenia), certified according to ISO9001 and ISO14001.

With subsidiaries in the 6 countries Switzerland, Germany, China, Slovenia, Canada and Japan the group offers worldwide presence and service on site.

Minova has partnered with FiReP in 2009 to bring new products and technical expertise to our portfolio.

Since then, we have been working jointly to provide our mining, energy and construction customers with an enhanced portfolio of support products and services.

Explore Product
arrow arrow
Product title
Ekoment RT

This chloride free mortar is a blend of selected rapid ordinary Portland cement and additives which modify the rheological properties and hardening of the mortar.

It can be used for the anchoring of steel parts, horizontal and vertical concrete surfaces, filling of cracks and anchoring of GRP bolts.

 

Explore Product
arrow arrow
Product title
GEOFLEX HS

GEOFLEX HS Component A is a special sodium silicate with additives. GEOFLEX HS Component B is a modified polyisocyanate.

The curing of Component A results in a silicate, whilst smultaneously a solid polyisocyanurate/polyurea is formed from Component B. The mixture of these two Components creates a tough, elastic, solid silicate resin (organic-mineral resin).

Explore Product
arrow arrow

Grouting

Our pumpable materials and bolting technology are used in soil or rock formation to provide you with optimal ground control.

Product title
Lokset™ Products

We have manufactured Lokset resin capsules since the late 1960's and are the leading supplier and innovator in this field. Our development and manufacturing ensures security of supply, service and support.

The Lokset system consists of an easily handled cartridge, containing a highly reinforced polyester resin component, together with its catalyst, in accurately measured quantities. The rotation of the bolt during installation ruptures the capsule, shreds the skin and mixes the two components causing a chemical reaction and transforming the resin mastic into a solid anchor.

The Lokset resin capsule series is available in multiple configurations of single/double length combinations, diameter, set time, set time combinations, viscosity and shelf life.

 

Did you know?

The oldest reference Minova has for Lokset® resin anchors was the strengthening of the London Heathrow Airport road access tunnel in 1963 to allow heavy jets to land. Since then there have been numerous applications across the world in mining applications, highway tunnels, civil applications and a submarine base.

Explore Product
arrow arrow
Product title
CarboThix

This product was designed to improve the productivity of ground support installation in underground mining and tunnelling applications. Using the pumpable resin enables the load to be taken up in minutes rather than the typical 24 hours from cementitious grouted systems. Typical applications of CarboThix™ include grouting of cable bolts, solid steel or GFRP bolts, self-drilling anchors and one-step bolting operations in automated mode or for consolidation injection works in direct overburden.

Explore Product
arrow arrow
Product title
Self Drilling System

Our know-how is the result of over 40 years of experience in the production and global supply.

The system features a hollow bar, which is used as a drill string for drilling either with water flush, air flush or cement grout flush.

All system components are rigorously tested according to stringent factory standards and ISO 9001 to ensure that the specifications are met. The sacrificial drill bit significantly enhances the productivity of the installation process. In order to improve performance and cost-effectiveness, project data are being collected from around the world.

Continuous optimisation of our drill bits is a primary concern to further improve the penetration rate and bit quality while at the same time reducing manufacturing costs. For improved corrosion resistance, Self Drilling Anchor components are either hot dip galvanised or fitted with a TwinCoat coating (hot-dip galvanisation with an additional dual epoxy coating).

Explore Product
arrow arrow
Product title
Glass Fibre Resin Polymer Products

GFRP products are suitable for temporary and permanent solutions and with their low-weight, their are ideal for decreasing risks associated with manual handling.

Our partnership with FiReP® allows us to provide you with the flexibility that you need, wherever you are.

FiReP® Group is one of the world’s largest producer of Fibre Reinforced Polymer (FRP) pultruded bars with unique profiles and thread functions for application in the mining, construction and energy sectors.

The Group has two plants in Shanghai (China) and Velenje (Slovenia), certified according to ISO9001 and ISO14001.

With subsidiaries in the 6 countries Switzerland, Germany, China, Slovenia, Canada and Japan the group offers worldwide presence and service on site.

Minova has partnered with FiReP in 2009 to bring new products and technical expertise to our portfolio.

Since then, we have been working jointly to provide our mining, energy and construction customers with an enhanced portfolio of support products and services.

Explore Product
arrow arrow

Spiling

Our products provide a secure canopy for tunnel advancement.

Product title
Self Drilling System

Our know-how is the result of over 40 years of experience in the production and global supply.

The system features a hollow bar, which is used as a drill string for drilling either with water flush, air flush or cement grout flush.

All system components are rigorously tested according to stringent factory standards and ISO 9001 to ensure that the specifications are met. The sacrificial drill bit significantly enhances the productivity of the installation process. In order to improve performance and cost-effectiveness, project data are being collected from around the world.

Continuous optimisation of our drill bits is a primary concern to further improve the penetration rate and bit quality while at the same time reducing manufacturing costs. For improved corrosion resistance, Self Drilling Anchor components are either hot dip galvanised or fitted with a TwinCoat coating (hot-dip galvanisation with an additional dual epoxy coating).

Explore Product
arrow arrow
Product title
CarboThix™

These products were designed to improve the productivity of ground support installation in underground mining and tunnelling applications. Using the pumpable resin enables the load to be taken up in minutes rather than the typical 24 hours from cementitious grouted systems.

 

CarboThix™ Fast

CarboThix™ Fast is an immediate partially stiffening and very fast curing dual component silicate resin for bonding injection drilling anchors, also for rock stabilization and water sealing. CarboThix Fast was developed to improve the productivity of ground support installation in underground mining and tunnelling applications. Using the pumpable resin enables loads to be taken up in minutes rather than the typical 24 hours from cementitious grouted systems. Typical applications of CarboThix Fast include grouting of cable bolts, steel or GFRP bolts, and sealing of roof bolts.

 

CarboThix™ 2

Typical applications of CarboThix™ 2 include sealing of injection bolts, steel or GFRP rods, and sealing of roof bolts. During application, the two components are intimately mixed and achieve a grease-like viscosity (the so called Thix effect) so that the grout stops flowing and cures to form a tough elastic and non-porous resin that will not mix with water or be diluted in wet holes.

Explore Product
arrow arrow
Product title
Ekoment RT

This chloride free mortar is a blend of selected rapid ordinary Portland cement and additives which modify the rheological properties and hardening of the mortar.

It can be used for the anchoring of steel parts, horizontal and vertical concrete surfaces, filling of cracks and anchoring of GRP bolts.

 

Explore Product
arrow arrow

Soil & Rock Nailing

Our steel and GFRP products are used at construction sites to reinforce cuttings, slopes and portals, preventing ground instability.

Product title
Self Drilling Soil and Rock Nails

SRNs are typically grouted along their entire length. In geotechnical engineering, they are used to stabilise natural or artificial slopes or to support structures e.g. retaining walls. To further stabilise the surface of the slope or rock, various support systems e.g. flexible reinforcing meshes or geotextiles may be installed that are held in place by the head plates of the nails.

Explore Product
arrow arrow
Product title
Lokset™ Products

We have manufactured Lokset resin capsules since the late 1960's and are the leading supplier and innovator in this field. Our development and manufacturing ensures security of supply, service and support.

The Lokset system consists of an easily handled cartridge, containing a highly reinforced polyester resin component, together with its catalyst, in accurately measured quantities. The rotation of the bolt during installation ruptures the capsule, shreds the skin and mixes the two components causing a chemical reaction and transforming the resin mastic into a solid anchor.

The Lokset resin capsule series is available in multiple configurations of single/double length combinations, diameter, set time, set time combinations, viscosity and shelf life.

 

Did you know?

The oldest reference Minova has for Lokset® resin anchors was the strengthening of the London Heathrow Airport road access tunnel in 1963 to allow heavy jets to land. Since then there have been numerous applications across the world in mining applications, highway tunnels, civil applications and a submarine base.

Explore Product
arrow arrow
Product title
Ekoment RT

This chloride free mortar is a blend of selected rapid ordinary Portland cement and additives which modify the rheological properties and hardening of the mortar.

It can be used for the anchoring of steel parts, horizontal and vertical concrete surfaces, filling of cracks and anchoring of GRP bolts.

 

Explore Product
arrow arrow

Surface control

Our products support surface stability.

Product title
Tekcrete™ Fast M

Fibre reinforced, this product offers strengths over 55 MPa and can be used in conventional, dry-process shotcrete equipment. It is ideal where immediate structural strength is required.

Tekcrete™ Fast M was developed in response to customer demand for a shotcrete with effectively immediate strength on application. The product can be used with or without steel or polymer mesh, although the mesh will provide additional tensile and flexural strength. Binding broken strata together for better structural integrity, Tekcrete™ Fast M can be used anywhere in a mine where conventional shotcrete is used and as with any coating or sealant.

 

Explore Product
arrow arrow
Product title
Tekflex

The high-strength Tekflex membrane was originally developed according to the TSL (Thin-Sprayed-Liner) technology to serve as an alternative to steel mesh and shotcrete for mining projects. Today, the Tekflex family has expanded and covers many more applications in the civil and tunnelling sectors.

Tekflex products are based on mineral materials with special additives or polymers to achieve sufficient rigidity or required flexibility depending on the type of the application. With just a few mm of thickness, the Tekflex membranes represent an effective, low-cost solution for changing the mechanical parameters of the lining or increasing impermeability. 

 

Explore Product
arrow arrow
Product title
FT-30

When mixed with water, the material sets within minutes. It creates a coating with instant resistance to pulling off and delamination caused by active leaks of water. It is particularly recommended for areas with high moisture content or highly watered.

Explore Product
arrow arrow

Micro-piling

Our self dilling micropiles provide high quality and rapid foundation support for infrastructure.

Product title
Self Drilling Micropiles

Micropiles are small diameter grouted piles (typically less than 300 mm in diameter) transferring compressive, tensile or alternating loads into the surrounding ground. Dependent on the ground conditions, Self Drilling Micropiles are designed either as end-bearing or friction piles.

Self Drilling Micropiles are typically installed via simultaneous drilling and grouting using cement grout as the flushing medium. Particularly in cohesionless or unstable ground conditions e.g. sand, clay or gravel, this is the fastest and most efficient installation method for micropile systems.

Explore Product
arrow arrow
Product title
Glass Fibre Resin Polymer Products

GFRP products are suitable for temporary and permanent solutions and with their low-weight, their are ideal for decreasing risks associated with manual handling.

Our partnership with FiReP® allows us to provide you with the flexibility that you need, wherever you are.

FiReP® Group is one of the world’s largest producer of Fibre Reinforced Polymer (FRP) pultruded bars with unique profiles and thread functions for application in the mining, construction and energy sectors.

The Group has two plants in Shanghai (China) and Velenje (Slovenia), certified according to ISO9001 and ISO14001.

With subsidiaries in the 6 countries Switzerland, Germany, China, Slovenia, Canada and Japan the group offers worldwide presence and service on site.

Minova has partnered with FiReP in 2009 to bring new products and technical expertise to our portfolio.

Since then, we have been working jointly to provide our mining, energy and construction customers with an enhanced portfolio of support products and services.

Explore Product
arrow arrow

Chemical injection

Our grouts and resins are used for reinforcement of ground or rock formations.

Product title
CarboPur

These resins are applicable over a wide range of temperatures and act effectively even against pressurised water.

CarboPur resins production line offers high-quality materials for temporary or permanent applications with different reaction data and resin behavior, applicable in infrastructure and civil engineering.

CarboPur WX is used for stabilisation in wet or water bearing rock formations. It is used for sealing water tributaries from rock formations, dams, or shaft walls. It can be used in renovation of wet shafts, tunnels, sewers, or brickwork.

CarboPur WF is used for sealing against water under hydrostatic pressure from strata, dams or shaft walls, sealing and consolidation in water-bearing strata and against water under pressure.

CarboPur WS is used for curtain injection in tunnels, dams, or on shaft walls; sealing against water, stabilisation, consolidation and repairing of cracks &/or fissures.

CarboPur WFA is used for sealing strong water ingress, e.g.construction pits, pipelines, shafts, and tunnels.

CarboPur WT is used in sealing against water under hydrostatic pressure from strata, dams or shaft walls, repair of wet shafts, tunnels, channels and walls, sealing of under water concrete sheet pilings and diaphragm walls.

 

Explore Product
arrow arrow
Product title
CarboStop

Special types with closed-cell resin structure were developed to increase ground impermeability or seal joints in civil structures.

These products are used for:

Grouting of fine to very fine hair line cracks and water-carrying sands or porous materials. Used for deep injecting, fixing of anchors, stabilisation and sealing of loose rock, stoppage of water inflow (also salt water), injecting of man-accessible sewer lines and tubes.

Stopping water inflow (also salt water), stabilisation and water sealing of loose rock, grouting of fine to medium-fine grained sands and gravel, fixing of anchors, injection of cracks, honeycombs, injections of man-accessible sewer lines and tubes

Stopping of water inflow (also salt water), sealing of loose rock, sealing of cracks and expansion joints in bridges and concrete structures. For use in deep injection, grouting of medium-fine to larger cracks, fissures, honeycombs, injections of man-accessible sewer lines and tubes where high elasticity and flexibility is required.

Stopping of flowing water, restoration of concrete structures according to German ZTV-ING.

 

Explore Product
arrow arrow
Product title
CarboThix

This product was designed to improve the productivity of ground support installation in underground mining and tunnelling applications. Using the pumpable resin enables the load to be taken up in minutes rather than the typical 24 hours from cementitious grouted systems. Typical applications of CarboThix™ include grouting of cable bolts, solid steel or GFRP bolts, self-drilling anchors and one-step bolting operations in automated mode or for consolidation injection works in direct overburden.

Explore Product
arrow arrow
Product title
GeoFlex Products

They consist of two components; Component A is a special sodium silicate with additives, whilst Component B is a modified polyisocyanate. These products are widely used in various applications of the construction industry, such as stabilising fragile zones, grouting of injection bolts and other specialised applications.

Thanks to their flexibility Geoflex is capable of dissipating deformation energy under the stress of strata movement.

Explore Product
arrow arrow
Product title
CarboCryl

CarboCryl products have a watery consistency and is injected into structures. They sets as a gel in any pores and fissures. The treated area then has the strength and waterproofing characteristics required. CarboCryl products are also solvent-free, making it an environmentally friendly solution for these types of repair projects.

CarboCryl are well suited for use in the following applications:

  • Injection barrier for sealing basements against water seepage and ingress
  • Horizontal barrier against rising humidity in brick work
  • Injection of fissures against oppressive or non-oppressive water
  • Pressure sealing of injection hoses
  • Repair of defective tunnel sealing membranes
Explore Product
arrow arrow

Ballast bonding

Our resins have been developed to stabilise rail ballast, decreasing maintenance and repair costs to rail infrastructure.

Product title
GeoFlex BB

GeoFlex BB Component A is a special sodium silicate with additives. GeoFlex BB (black) Component B is a modified polyisocyanate. The curing of Component A results in a silicate,whilst a solid polyisocyanurate/polyurea is formed from Component B.

The mixture of these two components creates a tough, elastic, solid silicate resin (organic-mineral resin).

Explore Product
arrow arrow

Sprayed coatings & membranes

Our sprayed coatings and membranes provide additional ground support and waterproofing solutions.

Product title
Tekflex

The high-strength Tekflex membrane was originally developed according to the TSL (Thin-Sprayed-Liner) technology to serve as an alternative to steel mesh and shotcrete for mining projects. Today, the Tekflex family has expanded and covers many more applications in the civil and tunnelling sectors.

Tekflex products are based on mineral materials with special additives or polymers to achieve sufficient rigidity or required flexibility depending on the type of the application. With just a few mm of thickness, the Tekflex membranes represent an effective, low-cost solution for changing the mechanical parameters of the lining or increasing impermeability. 

 

Explore Product
arrow arrow
Product title
Tekcrete™ Fast M

Fibre reinforced, this product offers strengths over 55 MPa and can be used in conventional, dry-process shotcrete equipment. It is ideal where immediate structural strength is required.

Tekcrete™ Fast M was developed in response to customer demand for a shotcrete with effectively immediate strength on application. The product can be used with or without steel or polymer mesh, although the mesh will provide additional tensile and flexural strength. Binding broken strata together for better structural integrity, Tekcrete™ Fast M can be used anywhere in a mine where conventional shotcrete is used and as with any coating or sealant.

 

Explore Product
arrow arrow
Product title
Capcem™ KT Products

Capcem™ KT Fast

Capcem™ KT is a rapid-hardening sealant coating that provides a protective layer to rock, concrete or coal surfaces which are susceptible to deterioration on exposure. Support strength develops rapidly after placement.

Capcem™ KT Fast 2C

Capcem™ KT Fast 2C is a sealant coating that provides a protective, light grey layer to rock, coal, or concrete surfaces which are susceptible to deterioration on exposure. This product is especially recommended for stabilisation of burnt coal surfaces, whilst its fast rate of strength development allows rapid development of support.

Capcem™ KT Grey

Capcem™ KT Grey is a sealant coating that provides a protective grey layer to rock, concrete or coal surfaces which are susceptible to deterioration on exposure.

Capcem™ KT White

Capcem™ KT White is a bright sealant coating that provides a protective layer to rock, concrete or coal surfaces which are susceptible to deterioration on exposure. The bright white colour makes it particularly suitable for use in waiting places, underground workshops and similar locations.

Explore Product
arrow arrow
Product title
CT Concrete Repair Systems

CT-2

CT-2 is a mortar used for repair and reconstruction of concrete and reinforced concrete. CT- 2 can be applied either manually with use of the bonding grout CT-S or CTA/ S, or by a wet-spray process for large area repairs.


CT-A/S

CT-A/S is a PCC/SPCC fine anti-corrosion and bonding mortar used for the repair and reconstruction of concrete structures. CT-A/S is also used as reinforcing steel anti-corrosion mortar and as bonding mortar between concrete and construction repair mortars.


CT-6

Repair Mortar CT-6 is a one-component material, ready-to- use after mixing with batched water. CT-6 is a cement-based mortar with high quality aggregate up to 8 mm and modified with additives and polymers (PCC / SPCC). The material is dedicated for wet-process spraying as well as for manual repairs of concrete. CT-6 is a part of CT-95 Concrete Repair System.


CT-D

CT-D is a one-component material, ready-to- use after mixing with batched water. CT-D is a cement-based mortar with high quality aggregate up to 4 mm and modified with additives and polymers (PCC). CT-D is a part of CT-95 Concrete Repair System.


CT-K

CT-K is a one-component material, ready-to- use after mixing with batched water. CT-K is a cement-based mortar with high quality aggregate up to 4 mm and modified with additives and polymers (PCC). CT-K is a part of CT-95 Concrete Repair System.


CT-W

CT-W is a one-component material, ready-to- use after mixing with batched water. CT-W is a cement-based mortar with high quality aggregate up to 2 mm and modified with additives and polymers (PCC / SPCC). CT-W is a part of CT-95 Concrete Repair System.

 

Explore Product
arrow arrow
Product title
Minostop

It is supplied as a ready to use blend of dry powders which requires only the addition of clean water to produce a highly compacted, rapid setting mortar which is easy to apply.

The material is based on a blend of cements, graded aggregates, special fillers and chemical additives which control the rate of set and minimise the risk of shrinkage cracking.

Explore Product
arrow arrow
Product title
Minobond Products

We offer four different products within this category, that vary in setting speeds and application area.

Explore Product
arrow arrow

Roads rehabilitation

Our sprayed coatings and membranes provide additional ground support and waterproofing solutions.

Product title
CarboLith

CarboLith products are used for ground stabilisation and filling of smaller cavities in the construction industry.

The products help in various renovation and construction of concrete, roads and infrastructure assets.

Explore Product
arrow arrow
Product title
CarboCryl

CarboCryl products have a watery consistency and is injected into structures. They sets as a gel in any pores and fissures. The treated area then has the strength and waterproofing characteristics required. CarboCryl products are also solvent-free, making it an environmentally friendly solution for these types of repair projects.

CarboCryl are well suited for use in the following applications:

  • Injection barrier for sealing basements against water seepage and ingress
  • Horizontal barrier against rising humidity in brick work
  • Injection of fissures against oppressive or non-oppressive water
  • Pressure sealing of injection hoses
  • Repair of defective tunnel sealing membranes
Explore Product
arrow arrow
Product title
CarboCrackSeal

CarboCrackSeal products are slow-reacting, permanently flexible PU resins designed for civil structure applications.

They can be used for closing working joints and active cracks and for water stopping in active cracks of concrete, brickwork or natural stone structures.

The resins have CE approvals according to the standard EN 1504-5.

 

Explore Product
arrow arrow
Product title
CarboStop

Special types with closed-cell resin structure were developed to increase ground impermeability or seal joints in civil structures.

These products are used for:

Grouting of fine to very fine hair line cracks and water-carrying sands or porous materials. Used for deep injecting, fixing of anchors, stabilisation and sealing of loose rock, stoppage of water inflow (also salt water), injecting of man-accessible sewer lines and tubes.

Stopping water inflow (also salt water), stabilisation and water sealing of loose rock, grouting of fine to medium-fine grained sands and gravel, fixing of anchors, injection of cracks, honeycombs, injections of man-accessible sewer lines and tubes

Stopping of water inflow (also salt water), sealing of loose rock, sealing of cracks and expansion joints in bridges and concrete structures. For use in deep injection, grouting of medium-fine to larger cracks, fissures, honeycombs, injections of man-accessible sewer lines and tubes where high elasticity and flexibility is required.

Stopping of flowing water, restoration of concrete structures according to German ZTV-ING.

 

Explore Product
arrow arrow
Product title
CarboPur

These resins are applicable over a wide range of temperatures and act effectively even against pressurised water.

CarboPur resins production line offers high-quality materials for temporary or permanent applications with different reaction data and resin behavior, applicable in infrastructure and civil engineering.

CarboPur WX is used for stabilisation in wet or water bearing rock formations. It is used for sealing water tributaries from rock formations, dams, or shaft walls. It can be used in renovation of wet shafts, tunnels, sewers, or brickwork.

CarboPur WF is used for sealing against water under hydrostatic pressure from strata, dams or shaft walls, sealing and consolidation in water-bearing strata and against water under pressure.

CarboPur WS is used for curtain injection in tunnels, dams, or on shaft walls; sealing against water, stabilisation, consolidation and repairing of cracks &/or fissures.

CarboPur WFA is used for sealing strong water ingress, e.g.construction pits, pipelines, shafts, and tunnels.

CarboPur WT is used in sealing against water under hydrostatic pressure from strata, dams or shaft walls, repair of wet shafts, tunnels, channels and walls, sealing of under water concrete sheet pilings and diaphragm walls.

 

Explore Product
arrow arrow
Product title
GeoFlex BB

GeoFlex BB Component A is a special sodium silicate with additives. GeoFlex BB (black) Component B is a modified polyisocyanate. The curing of Component A results in a silicate,whilst a solid polyisocyanurate/polyurea is formed from Component B.

The mixture of these two components creates a tough, elastic, solid silicate resin (organic-mineral resin).

Explore Product
arrow arrow

Equipment & accessories

Our range of product equipment and accessories provides enhanced operational capabilities.

Product title
Super Turbo Bolter

Its design enables it to achieve 50 % more thrust during drilling or bolt installation compared to other machine types which require a 3rd stage leg for similar reach.

The careful selection of materials and design allows the Super Turbo to be the lightest and strongest machine available which enables it to operate reliably and effectively in even the toughest mining environments.

Explore Product
arrow arrow
Product title
Turmag Drilling Machine

The Turmag has been developed in accordance with state of the art technology with regard to efficiency, handling and operational safety. The machine pressure has been tested by Lloyds Beal Test Centre.

Explore Product
arrow arrow
Product title
CarboSolv Products

CarboSolv products are extremely efficient solvents that are widely used for the lubrication, degreasing and cleaning of the injection pumps and hoses in mining, construction and energy applications.

Explore Product
arrow arrow
Product title
Lokset Accessories

We provide a comprehensive range of auxiliary products for the fast and easy application of this innovative product.

Resin Capsule Parachutes

Parachutes are recommended when Lokset™ resin capsules are air-loaded into rock bolt holes. The parachute guides and protects the capsule while it travels at high speed through the loading tube into the hole, then holds the capsule up the hole until the bolt is inserted.

Instructions for use:

  • Gently force the resin capsule into the open end of the parachute
  • Load the capsule into the capsule gun so that the parachute is on the front end
  • Fire the capsule into the hole

------------------------------------------------------------------------------------------------------------------------

Resin Capsule Top Hats (Retainers)

Resin capsule top hats are made from recycled plastic and are used to retain resin capsules in rock bolt holes, until the bolts are inserted. This frees the operator to use both hands for other tasks such as lining up the rock bolt and operating the bolting machine.

Instructions for use:

  • Insert the resin capsule into hole.
  • Push in the top hat behind the resin capsule.
  • If multiple capsules are used, push in a top-hat behind each one

------------------------------------------------------------------------------------------------------------------------

Resin Capsule Injector

The resin injector is used to load Lokset™ resin capsules into roofbolt holes, and consists of a plunger within a hollow tube. Each Resin Injector is tested in our laboratories prior to dispatch.

Instructions for use:

  • Remove the plunger from the outer tube.
  • Insert the appropriate size polytop into one end of the outer tube.
  • From the other end, insert the Lokset™ resin capsules
  • Push the injector against the roofbolt hole opening, and push the plunger until the resin capsules and polytop are inside the hole.

--------------------------------------------------------------------------------------------------------------------------

Quick-Chem™ System

The Quick-Chem™ Lokset™ resin capsule insertion system ensures safe, fast and complete insertion of resin capsules. The system consists of a specially designed cap suitable for attaching to Lokset™ resin capsules and an insertion tube that carries the resin capsule(s) to the back to of the holes and is then removed for re-use.

Instructions for use:

  • Securely attach appropriate Quick- Chem™ cap to the end of the Lokset™ resin
  • Place the capsule with the cap attached in the Quick-Chem™ insertion tube
  • Fit the tube to the shank of the drifter
  • Collar the tube in the hole and push into the hole until the resin capsule cannot be seen
  • Withdraw the tube
Explore Product
arrow arrow

Chemical injection

Our grouts and resins are used to inhibit water ingress and mitigate the negative effects that might arise in your project due to excessive water inflows.

Product title
CarboPur

These resins are applicable over a wide range of temperatures and act effectively even against pressurised water.

CarboPur resins production line offers high-quality materials for temporary or permanent applications with different reaction data and resin behavior, applicable in infrastructure and civil engineering.

CarboPur WX is used for stabilisation in wet or water bearing rock formations. It is used for sealing water tributaries from rock formations, dams, or shaft walls. It can be used in renovation of wet shafts, tunnels, sewers, or brickwork.

CarboPur WF is used for sealing against water under hydrostatic pressure from strata, dams or shaft walls, sealing and consolidation in water-bearing strata and against water under pressure.

CarboPur WS is used for curtain injection in tunnels, dams, or on shaft walls; sealing against water, stabilisation, consolidation and repairing of cracks &/or fissures.

CarboPur WFA is used for sealing strong water ingress, e.g.construction pits, pipelines, shafts, and tunnels.

CarboPur WT is used in sealing against water under hydrostatic pressure from strata, dams or shaft walls, repair of wet shafts, tunnels, channels and walls, sealing of under water concrete sheet pilings and diaphragm walls.

 

Explore Product
arrow arrow
Product title
CarboStop

Special types with closed-cell resin structure were developed to increase ground impermeability or seal joints in civil structures.

These products are used for:

Grouting of fine to very fine hair line cracks and water-carrying sands or porous materials. Used for deep injecting, fixing of anchors, stabilisation and sealing of loose rock, stoppage of water inflow (also salt water), injecting of man-accessible sewer lines and tubes.

Stopping water inflow (also salt water), stabilisation and water sealing of loose rock, grouting of fine to medium-fine grained sands and gravel, fixing of anchors, injection of cracks, honeycombs, injections of man-accessible sewer lines and tubes

Stopping of water inflow (also salt water), sealing of loose rock, sealing of cracks and expansion joints in bridges and concrete structures. For use in deep injection, grouting of medium-fine to larger cracks, fissures, honeycombs, injections of man-accessible sewer lines and tubes where high elasticity and flexibility is required.

Stopping of flowing water, restoration of concrete structures according to German ZTV-ING.

 

Explore Product
arrow arrow
Product title
Ekopur Products

Ekopur products are versatile and with varying parameters, they are used for a wide number of applications including:

  • Decorative cast elements
  • Electric insulation of cables
  • Water sealing
  • Gas sealing
  • Rock mass strengthening
  • Thermal insulation
Explore Product
arrow arrow

Sprayed coatings & membranes

Our sprayed coatings and membranes provide additional ground support and waterproofing solutions.

Product title
Tekflex DS-W

The powder is mixed with water at the special nozzle and creates a suspension, which gels within seconds, creating a continuous membrane on the applied surface.

After several minutes, it becomes tack free and then rapidly increases in strength over next days.

As a result, a strong and elastic sealing membrane is formed.

The membrane bonds very well to surfaces such as rock, coal and concrete.

Explore Product
arrow arrow
Product title
FT-30

When mixed with water, the material sets within minutes. It creates a coating with instant resistance to pulling off and delamination caused by active leaks of water. It is particularly recommended for areas with high moisture content or highly watered.

Explore Product
arrow arrow

Joints sealing

Viscosity and reaction times are two of the most critical attributes of all injection materials to achieve effective joint sealing. Our chemical and cementitious products are specially formulated to seal all types and sizes of joints.

Product title
CarboCrackSeal H Plus

CarboCrackSeal H Plus serves for grouting, sealing and elastic connection of fissures and cavities in for concrete, brickwork or natural stone buildings and other civil engineering structures.

This slow reacting, highly flexible two-component polyurethane resin has wide use in the construction industry.

CarboCrackSeal H Plus, Comp. A comprises of polyetherester polyols and additives, while CarboCrackSeal H Plus, Comp. B is a modified isocyanate.

The resin is applied through injection hoses embedded in concrete structures ensuring proper resin distribution. This product is widely used for structural repair and water stoppage.

Explore Product
arrow arrow
Product title
CarboCryl Wv

CarboCryl Wv, A1, is an aqueous acrylate solution. CarboCryl Wv, A2, is an accelerator based on amines. The hardener CarboCryl Wv, B2, a peroxide salt, is a solid, which is soluble in water. CarboCryl does not contain acrylamide.

After mixing, the hardener triggers the polymerisation of the methacrylate yielding an elastic gel.

CarboCryl Wv Can be used with CarboCryl Plus for repair of dilatation joints.

Explore Product
arrow arrow
Product title
CarboPur WF

CarboPur WF, Component A is a mixture of various polyols and additives and component B is a polyisocyanate.
When the mixed resin penetrates the structure to be sealed, the water in the cracks and joints is displaced due to the hydrophoby and the viscosity of the resin. Traces of water make the resin foam.

Explore Product
arrow arrow

Equipment & accessories

Our range of product equipment and accessories provides enhanced operational capabilities.

Product title
Super Turbo Bolter

Its design enables it to achieve 50 % more thrust during drilling or bolt installation compared to other machine types which require a 3rd stage leg for similar reach.

The careful selection of materials and design allows the Super Turbo to be the lightest and strongest machine available which enables it to operate reliably and effectively in even the toughest mining environments.

Explore Product
arrow arrow
Product title
Turmag Drilling Machine

The Turmag has been developed in accordance with state of the art technology with regard to efficiency, handling and operational safety. The machine pressure has been tested by Lloyds Beal Test Centre.

Explore Product
arrow arrow

Special

Specialist products aimed at enhancing water control within the construction industry.

Product title
CarboSolv U

It is a solvent designed for cleaning implements and especially pumps after use of polyurethane/silicate resins.

Explore Product
arrow arrow
Product title
CarboSolv D

It is a solvent blend based on dicarbonic acid esters. It has got a high polarity and is environmentally friendly.

Explore Product
arrow arrow
Product title
CarboSolv S

It is a lubricant based on synthetic esters, that is readily biodegradable and is compatible with standard sealing materials such as Viton, FPM, HBNR, AU, NBR.

Explore Product
arrow arrow

Cavity filling

Providing pumpable grouts for cavity and void filling in the construction sector.

Product title
Carbofill

Carbofill is and instant foaming two-component phenolic foam used for:

 - Filling of cavities e.g. in roads, longwalls and rise drifts

 - Filling of cavities to prevent gas accumulations

 - Filling of roadside packs against air leakage from the goaf

 - Construction of dams for fire fighting

 - Sealing of end dams

 - Sealing and filling for fighting fire e.g. by Wiborex bolt

 - Stabilisation of broken fragments in the end positions of the longwall

 - Gas sealing of the roadside embankment

 

We recommend using PHENET rinsing liquid for cleaning of the equipment contaminated with Carbofill Component A.

Explore Product
arrow arrow
Product title
GeoFoam

Component A is a modified silicate, and component B is a modified isocyanate. After mixing in a volumetric ratio 1: 1 the resin starts foaming up within a few seconds.

Explore Product
arrow arrow
Product title
WilkitFoam T

This strongly expanding foam filler is suitable for spray-on application and is used for cavity filling, consolidation, sealing, water stopping and cavity stabilisation.

WilkitFoam T, Comp. A is a modified water glass, and component B is a modified isocyanate. After mixing the resin starts producing carbon dioxide gas and water vapour within a few seconds, thus forming a light-weight foam.

In free-rise foaming, the surface has a brittle touch in the beginning (“sanding off”), but after some hours, the foam becomes semi elastic throughout.

Explore Product
arrow arrow
Product title
WilkitFoam F

This strongly expanding, flame-resistant foam filler is suitable for spray-on application and is used for rapid filling of cavities, consolidation, sealing, stopping of water intrusions and cavity stabilisation.

WilkitFoam F, Comp. A is a modified water glass, and component B is a modified isocyanate. After mixing the resin starts producing carbon dioxide gas and water vapour within a few seconds, thus forming a light-weight foam.

In free-rise foaming, the surface has a brittle touch in the beginning (“sanding off”), but after some hours, the foam becomes semi elastic throughout.

Explore Product
arrow arrow

Special

Our PU, Epoxy and Silicate resin systems are often used in a variety of applications due to strong adhesion, durability and various specialised characterisitcs.

Product title
CarboSolv U

It is a solvent designed for cleaning implements and especially pumps after use of polyurethane/silicate resins.

Explore Product
arrow arrow
Product title
CarboSolv D

It is a solvent blend based on dicarbonic acid esters. It has got a high polarity and is environmentally friendly.

Explore Product
arrow arrow
Product title
CarboSolv S

It is a lubricant based on synthetic esters, that is readily biodegradable and is compatible with standard sealing materials such as Viton, FPM, HBNR, AU, NBR.

Explore Product
arrow arrow