We provide you with solutions for both active and passive methods of rock support wherever you are.

Our products range from various steel and Glass Fibre Reinforced Polymer (GFRP) bolts to steel arches, meshes and shotcretes.

Our offering can help you with:

• Roof and ground control
• Slope stabilisation
• Rock fall
• Permanent and temporary rock bolting
• Spiling
• Converging/yielding areas

Bolts alone may not be enough.

Many applications require additional components to ensure the desired results.

We provide steel and GFRP accessories that work in combination with our products for you to achieve the best outcomes. From drill bits, couplings, meshes to plates and nuts and trusses. Our portfolio works to provide you with the right solutions wherever you are.

Lokset capsules are filled with a reinforced thixotropic polyester resin in one compartment and a catalysed mastic filler in the other, separated by a physical barrier. The rotation of the bolt during installation ruptures the capsule, shreds the skin and mixes the two components causing a chemical reaction and transforming the resin mastic into a solid anchor.

We provide a comprehensive range of auxiliary products for the fast and easy application of this innovative product.

Resin Capsule Parachutes

Parachutes are recommended when Lokset™ resin capsules are air-loaded into rock bolt holes. The parachute guides and protects the capsule while it travels at high speed through the loading tube into the hole, then holds the capsule up the hole until the bolt is inserted.

Instructions for use:

• Gently force the resin capsule into the open end of the parachute
• Load the capsule into the capsule gun so that the parachute is on the front end
• Fire the capsule into the hole

------------------------------------------------------------------------------------------------------------------------

Resin Capsule Top Hats (Retainers)

Resin capsule top hats are made from recycled plastic and are used to retain resin capsules in rock bolt holes, until the bolts are inserted. This frees the operator to use both hands for other tasks such as lining up the rock bolt and operating the bolting machine.

Instructions for use:

• Insert the resin capsule into hole.
• Push in the top hat behind the resin capsule.
• If multiple capsules are used, push in a top-hat behind each one

------------------------------------------------------------------------------------------------------------------------

Resin Capsule Injector

The resin injector is used to load Lokset™ resin capsules into roofbolt holes, and consists of a plunger within a hollow tube. Each Resin Injector is tested in our laboratories prior to dispatch.

Instructions for use:

• Remove the plunger from the outer tube.
• Insert the appropriate size polytop into one end of the outer tube.
• From the other end, insert the Lokset™ resin capsules
• Push the injector against the roofbolt hole opening, and push the plunger until the resin capsules and polytop are inside the hole.

--------------------------------------------------------------------------------------------------------------------------

Quick-Chem™ System

The Quick-Chem™ Lokset™ resin capsule insertion system ensures safe, fast and complete insertion of resin capsules. The system consists of a specially designed cap suitable for attaching to Lokset™ resin capsules and an insertion tube that carries the resin capsule(s) to the back to of the holes and is then removed for re-use.

Instructions for use:

• Securely attach appropriate Quick- Chem™ cap to the end of the Lokset™ resin
• Place the capsule with the cap attached in the Quick-Chem™ insertion tube
• Fit the tube to the shank of the drifter
• Collar the tube in the hole and push into the hole until the resin capsule cannot be seen
• Withdraw the tube