Adhesives and Linings

CARBO SIL20 is a two-component repair resin. Component A is a special water glass and Component B is a modified polyisocyanate. The curing of component A during the reaction results in a silicate; simultaneously a solid polyisocyanurate/polyurea is formed from the component B.

For many years the Minova resins have been used successfully to repair sewers and ducts. The resins and methods satisfy every demand and damage symptoms.

Component A is a polyol containing a mineral filler and processing aid. Component B is a polyisocyanate. CarboPast H is a screeding compound, which hardens shrink-free.

As fast-damming adhesive we recommend CarboLith Thix.

This product is a solvent- and softener - free primer that converts to a hard and matt film after being exposed to air humidity.

It is used to solidify excoriated floor fringes and for sealing concrete surfaces against contamination with oil, grease, salt, or other chemicals.

Component A is a polyol filled with mineral substances and added processing aids. Component B is a polyisocynate on MDI-basis. After mixing the components, a creamy and easily spreadable adhesive is obtained. After 24 - 48 hours, the parquet adhesive is hardened to a tough, permanent elastic and hydrolysis-resistant adhesive.

It is a high-grade one-component floor adhesive with a polymer basis, that is anhydrous and solvent-free.

When added to tailings slurry, the components react in stages to form a stiff cemented backfill, the characteristics of which can be designed to suit specific backfilling requirements.